Uniball and Snap ring replacements for L&W Radius Rods and Trailing Arms.
PLEASE MEASURE THE INSIDE DIAMETER OF YOUR CURRENT UNIBALL TO MAKE SURE YOU GET THE CORRECT REPLACEMENT FOR YOUR PARTS. (L&W is NOT responsible for knowing the size Uniball needed for your product, as some may vary.)
These are considered wear items and are not covered under warranty claims. 
We recommend using a NON water-based lubricant on these for longer lasting use. 
 
SEE FITMENTS BELOW
The Honda Talon Radius rods will come with either the 3/4″ Uniballs, the 12mm Uniballs, or 15mm Uniballs- (AS SOME RODS MAY VARY)
The other models listed (PRO XP/TURBO/1K/TURBO S/CAN-AM) will all come with the same size(12mm OR 15mm) uniballs in either a set of (2) or (4). (AS SOME RODS MAY VARY)
L&W Trailing Arms will come with (2) of the 3/4″ Uniballs. 
PLEASE MEASURE THE INSIDE DIAMETER OF YOUR CURRENT UNIBALLS TO MAKE SURE YOU GET THE CORRECT REPLACEMENT FOR YOUR PARTS. (L&W is NOT responsible for knowing the size Uniballs needed for your product, as some may vary.)